saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3661 > < Initial Inspection and Diagnostic Overview|Page 3659
Page 30
background image

present, continue in Trouble Code Tables.

5

Check the operation of the extra fog lights by selecting "READ SWITCHES" from the menu and then "EXTRA FOG LIGHTS". Read the ISAT
scan tool display as follows:
Switch activated --> "ON"
Switch not activated --> "OFF"

6

Check that 12 V is present between pin 5 of the switch connector and a good grounding point. If the voltage is correct, see point 7
If it is not, check the wiring for continuity/shorting between the fuse for the left-hand parking lights and pin 5 of the switch connector.

7

Connect a jumper lead between pins 5 and 7 of the switch connector.
If the fog lights work, the fault is in the switch. Change the switch.

8

If they do not work, check the wiring for continuity/shorting as follows:
-

between ICE module pin 17 and switch connector pin 7.

Hazard Flashers

Initial Inspection and Diagnostic Overview|Page 3661 > < Initial Inspection and Diagnostic Overview|Page 3659