900 SE Convertible V6-2498cc 2.5L DOHC (1995)
If the rear window washer works, the fault is in the switch. Change the switch.
3
If it does not work, check the wiring between pin 62 of the ICE module connector and pin 4 of the switch connector for continuity/shorting.
4
Check whether a 12 V power supply is present on the washer pump's positive (+) terminal when the switch is pressed.
If no power supply is present, check the wiring between pin 4 of the switch connector and the washer pump's positive (+) terminal for
continuity/shorting.
5
If the rear window washer does not work after the above checks have been carried out, the fault is probably in the rear window washer pump.
Change the washer pump.
Preliminary Information
The following charts contain data and instructions for measuring voltage levels on the Integrated Central Electronics (ICE) control module.