saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Control Module Ground|Page 5860 > < Control Module Ground|Page 5858
Page 5
background image

SHIFTING, N-D

When the selector lever is moved from N to D, the transmission temporarily selects 3rd gear in order to make the shift as smooth as possible.

This gear-shifting compensation is performed on condition that:
1. The brake light switch is activated.
2. The throttle is closed.
3. Shifting is carried out from N to D.
4. The speed of the car is below 5 km/hr.
5. The gear-shifting program selected is NORMAL or SPORT.

SHIFTING, N-D AND N-R

When the selector lever is moved to 1, 2, 3 or D from P, R or N, or to R from any other position, the transmission control module sends a signal to
the engine control module requesting it to retard the ignition and so reduce the torque of the engine in order to prevent jerky or abrupt shifting.

A condition for this to occur is that the throttle opening is less than 20%.

Limp-Home

Control Module Ground|Page 5860 > < Control Module Ground|Page 5858