900 SE Convertible V6-2498cc 2.5L DOHC (1995)
Transmission Range Switch: Description and Operation
Gear Engaged
The gear selector position sensor is mounted in the transmission housing. It contains the reversing light switch, starting interlock switch and switches
which inform the transmission control module on which gear is engaged.
The gear selector position sensor is basically a positional switch that is supplied with current via the +X circuit and in which a number of slip contacts
indicate the selector position. Different combinations of the terminals A, B. C and PA indicate the selector lever position (see table above). The slip
contacts can be either closed (ON) or open (OFF).
Incorrect decoding of the slip contacts will activate the limp-home mode.
The above table shows the relationship between the gear selector position sensor's internal terminals A, B. C and PA and the pins of connector H10-1
and those of the transmission control module.
