900 SE Convertible V6-2498cc 2.5L DOHC (1995)
9. Lift out the airbag.
Installation
WARNING: Check very carefully that there are no objects between the airbag and the facia before the airbag is fitted. Any loose objects in the
way of the airbag when it is detonated will be thrown with enormous force and constitute a mortal danger for the driver and passengers.
1. Place the airbag in position. Check that there are no loose objects between the facia and the airbag. Tighten the nuts (6) that secure the airbag to
the facia.
Tightening torque: 9 Nm (6.6 ft lb)
2. Seal the front right and the rear left nuts with marking paint.
3. Tighten the bolts that secure the stay to the steering wheel member.
Tightening torque: 20 Nm (14.8 ft lb)
4. Plug in the airbag connector to the airbag.