saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

All Technical Service Bulletins for Power Steering Fluid Reservoir: > < Power Steering Fluid|Capacity Specifications|Page 7736
Page 1
background image

Power Steering Fluid Reservoir: Customer Interest
Power Steering Fluid Reservoir - Leaks

CATEGORY
Steering

SECTION
6

PAGE
6

ISSUE
04/95-0560

CODE
644

Subject: 
Topping Up with Power Steering Fluid

Application: 
1994-900

It is possible in some instances for a small amount of the power steering fluid to leak out of the reservoir. This may occur at high temperatures and at
maximum steering lock. To avoid this, follow the instructions below when topping up with power steering fluid.

Also note that there has been a change to the specification of power steering fluid for 1994-900 models. Due to the lack of availability of the originally
specified Texaco 1890 fluid, the Factory has now changed their recommendation to GM Power Steering Fluid.

Cars Affected:

1994 and later 900 models

Parts:

GM Power Steering Fluid

Action:

1.

Make sure that the temperature of the fluid in the power steering system is about 68°F (+20°C).

2.

Adjust the front wheels so that they are in the straight-ahead position.

3.

Check the level of the fluid. It should be between the MAX and MIN marks on the dipstick fitted to the cap of the fluid reservoir. See Figure 1,
item A.

All Technical Service Bulletins for Power Steering Fluid Reservoir: > < Power Steering Fluid|Capacity Specifications|Page 7736