900 SE Convertible V6-2498cc 2.5L DOHC (1995)
Stabilizer Bar, Sway Control: Service and Repair
Front Suspension
NOTE: The numbers found below in parenthesis ( ), refer to that number (and that part/component) found in the illustration. (The drawings show a car
fitted with the V6 engine.)
REMOVAL
1. Open the bonnet. Lift out the engine, using special power unit yoke and feet tool Nos. 83 93 977 and 83 94 769 (1), or equivalents.
2. Raise the car.
3. Undo the exhaust pipe and suspend it at the rear by means of steel wire (2).
4. Place a stand under the sub-frame.
