900 SE Convertible V6-2498cc 2.5L DOHC (1995)
5. Back off the two front sub-frame retaining bolts (3).
6. Remove the four retaining bolts (4) and the two retaining nuts (5) at the rear of the sub-frame.
7. Lower the sub-frame at the rear.
8. Unscrew the two nuts securing the anti-roll bar (6).
9. Remove the anti-roll bar's two retaining clamps (7).
10. Remove the anti-roll bar.
INSTALLATION
1. Lubricate the bushes with grease such as Molycote 33.
2. Position the anti-roll bar on the sub-frame.
3. Install the rubber bushes on the lefthand and righthand sides.
4. Position the retaining clamps and install the bolts without tightening them (7).
