900 SE Convertible V6-2498cc 2.5L DOHC (1995)
6.
Reconnect the hose to each new nozzle.
7.
Replace each washer nozzle by fully lowering the nozzle assembly through the hood until the locking lugs lock in place.
8.
Top off the washer fluid reservoir. Follow the instructions on the washer fluid container to reduce the risk of freezing.
9.
Operate the washer. The pattern should dispense as shown in Figure 2.
10.
If the streams do not produce the pattern shown, use a pin or needle to adjust the jet or jets (see Figure 3).
11.
Operate the washer and recheck the pattern.
12.
Repeat steps 10 and 11 until the washer pattern is correct.
Warranty Information:
To resolve a customer complaint for a vehicle in warranty, submit a claim using the following information: Failure coding: 36356-71-1-01-01.
Labor operation number: 36356, R&R Washer Nozzle. for 0.2 hr.
Labor operation number: 36358, R&R Return Valve, for 0.2 hr.
