saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

ISAT Scan Tool Menu Structure|Page 6398 > < ISAT Scan Tool Menu Structure|Page 6396
Page 46
background image

If a power supply is present, check the wiring between pin 38 of the ICE module connector and pin 5 of the switch connector.

2

Check whether a 12 V power supply is present on:
-

the washer pump's positive (+) terminal when the switch is in Position P.

-

If it is not, check the wiring between pin 5 of the switch and the washer pump's positive (+) terminal for continuity/shorting.

3

For further information about checking the washer hoses, see "Wiper and Washer System".

4

If the windshield washer system does not work after the above checks have been carried out, the fault is probably in the washer pump. Change the
pump.

ISAT Scan Tool Menu Structure|Page 6398 > < ISAT Scan Tool Menu Structure|Page 6396