900 SE Hatchback L4-1985cc 2.0L DOHC Turbo EFI (1997)
15.
Remove the pull rod from the door handle and fit the new pull rod.
16.
Fit the central locking system motor onto the new lock unit and plug in the connector. Lift the lock unit into the door.
17.
Fit the three retaining screws for the lock unit and guide in the rods.
18.
Screw on the lock unit.
19.
Adjust the nut on the pull rod between the door handle and the lock so that there is obvious play in the outer handle (not more than 3 mm).
