900 SE Hatchback L4-1985cc 2.0L DOHC Turbo EFI (1997)
Filler Cap Lock Motor: Service and Repair
To remove
1
Remove the parcel shelf and its pivot, and also the frame for the speaker grille.
2
Fold the side trim out of the way.
3
Slacken the screws securing the bracket for the central locking motor and lift out the complete bracket.
4
Remove the motor from the bracket and unplug the connector.
To install
Important: Make sure that the locking pin enters the rubber bush so that it is properly located.
NOTE: Smear a little petroleum jelly (Vaseline) on the locking pin.
