saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Housing Assembly HVAC|Service and Repair > < Mechanical Specifications|Page 5349
Page 1
background image

Housing Assembly HVAC: Description and Operation

1 - Defroster
2 - Panel
3 - Floor

Air Distribution

In the climate control unit the air is directed by the air distribution damper to the defroster, panel or floor vents. The knob on the control panel can
also be set between the three main settings. The air is then divided between defroster and floor or between panel and floor.

1 - Defroster

The air is directed to the vents in the top of the dashboard and to the defroster outlets for the front side windows.
At the same time a small amount of air flows to the dash vents to prevent a cold draft from the door windows.

2 - Panel

The air is directed to:
-

The air vents in the dashboard

-

The air vent at the rear of the center console

3 - Floor

The air is directed to:
-

The air vents under the dashboard.

-

The air vents under the front seats.

-

The air vents by the rear-door windows.

At the same time a small amount of air flows to the dash vents to prevent a cold draft from the door windows. Select a combination of defrost and
floor settings to achieve the most efficient demisting of the rear-door windows.

Housing Assembly HVAC|Service and Repair > < Mechanical Specifications|Page 5349