saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

ISAT Scan Tool Menu Structure|Page 2671 > < ISAT Scan Tool Menu Structure|Page 2669
Page 32
background image

2

If it does not, check the lights switch by measuring the resistance:
-

across pins 2 and 5 with the lights switch in position 0.

-

across pins 1 and 4 with the lights switch in position 2.
If the instrument shows a resistance of < 1 ohm, the lights switch is OK.

3

Connect a BOB and check the lead for continuity/shorting as follows:
-

between pin 40 of the ICE module connector and pin 4 of the lights switch connector.

-

between pin 63 of the ICE module connector and pin 5 of the lights switch connector.

Parking Lights

ISAT Scan Tool Menu Structure|Page 2671 > < ISAT Scan Tool Menu Structure|Page 2669