saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

ABOUT US
Gear Selector Position Sensor <--> [Transmission Position Switch/Sensor, A/T] > < Throttle Position Sensor|Specifications|Page 2819

900 SE Hatchback L4-1985cc 2.0L DOHC Turbo EFI (1997)

Page 1
background image

Throttle Position Sensor: Service and Repair

To Remove 

1. Remove the engine cover.
2. Remove the idle air control valve with hoses.
3. Unplug the connector, remove the two retaining bolts and remove the sensor. Note the O-ring.

 
To Install 

1. Make sure that the O-ring's correctly positioned and install the sensor on the throttle spindle. Tighten the retaining bolts. 
2. Plug in the connector and idle air control valve. 
3. Install the engine cover.

Gear Selector Position Sensor <--> [Transmission Position Switch/Sensor, A/T] > < Throttle Position Sensor|Specifications|Page 2819