900 SE Hatchback L4-1985cc 2.0L DOHC Turbo EFI (1997)
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
To Remove
1. Unscrew the expansion tank filler cap to release the pressure in the cooling system. Screw the cap back on again.
2. Remove the engine cover.
3. Unplug the connector and remove the sensor.
To Install
Install in reverse order.
Tightening torque 13 Nm (9.5 ft lbs).
WARNING: Coolant escaping under pressure can cause serious injury.
