saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Operational Description|Page 9205 > < Operational Description|Page 9203
Page 3
background image

Arming the theft alarm

1

When arming, press the left-hand button on the remote control. When the button is pressed, a light confirmation is given by the car's direction
indicators flashing once. The flash/light confirmation for this function is programmable.

2

The car's anti-theft alarm is then armed and all doors are locked by the central locking system which has received a signal from the alarm control
module (pin 17). The tailgate is also armed if it is closed.

3

When the alarm is armed, the LED lights continuously for 10 seconds. During this so- called delay period, the alarm is not armed and the
passenger doors (not the driver door), the tailgate or the bonnet can be open without the alarm being set off.

4

If the driver's door is opened during the delay period, the anti-theft alarm will be disarmed automatically. At the end of the delay period the LED
will start flashing at the rate of 1 flash every 2 seconds, which indicates that the alarm is armed.

Important:

Anti-Theft Alarm

If the driver's door is open or the ignition switched on, it will not be possible to lock or unlock the car nor arm or disarm the alarm by means of the
remote control unit.

Anti-theft alarm with VSS

If the driver's door is open or the ignition switched on, it will not be possible to arm the alarm nor lock or unlock the car. On the other hand, the alarm
can always be disarmed if a door is open.

Disarming the theft alarm

1

When disarming, press the left-hand button on the remote control. When the button is pressed, a light confirmation is given by the car's direction
indicators flashing 3 times (if the alarm has been set off during the time it was armed, it flashes 5 times). The flash/sound confirmation of this
function is programmable.

2

The car's anti-theft alarm is then disarmed and all doors (except the tailgate) are unlocked by the central locking system which receives the unlock
signal from the alarm control module (pin 6).

3

When the alarm is disarmed, the LED lights for 1 second and then goes out.

Important:  
(The following does not apply to anti-theft alarm systems for US/CA)
It is not possible to arm or disarm the alarm by means of the car key.

Operational Description|Page 9205 > < Operational Description|Page 9203