900 SE Sedan L4-1985cc 2.0L DOHC Turbo EFI (1996)
If the car is equipped with an ACS (Sensonic), the SID receives information on the system via pin 6. Communication is of single-wire data link type.
The following messages can be displayed:
- "DISENGAGE GEAR"
Displayed if input shaft speed exceeds 7000 rpm after changing gear or if neither the brake pedal nor the accelerator is depressed when the car is
stationary with a gear engaged. This message is also displayed if an attempt is made to start the engine with a gear engaged or with reverse gear
engaged and the brake pedal not depressed.
- "SHIFT DOWN"
Displayed if input shaft speed is less than 850 rpm after changing gear.
- "OVERHEATED CLUTCH"
Displayed when the clutch is overloaded (overheated).
CLOCK AND OUTSIDE TEMPERATURE
