saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

ISAT Scan Tool Menu Structure|Page 10088 > < ISAT Scan Tool Menu Structure|Page 10086
Page 20
background image

2.

8

Check the heating elements as follows:
-

12 V supply should be present between pin 1 of the connector for the heating elements and a good grounding point.

-

The resistance across pin 2 of the connector for the heating elements and a good grounding point should be < 1 ohm.

9

If the readings obtained in point 8 are not OK, check the wiring between the relay and the heating elements for continuity/shorting.

10

If the readings obtained in point 8 are OK, the fault is in the heating element. Change the heating element.

Electrically Heated Rear Window

1

Check that the fuses for the electrically heated rear window relay and the climate control unit or the heating/ventilation control panel are intact and

ISAT Scan Tool Menu Structure|Page 10088 > < ISAT Scan Tool Menu Structure|Page 10086