900 SE Sedan L4-1985cc 2.0L DOHC Turbo EFI (1996)
INSTALLATION
1. Clean the surfaces and install the exhaust manifold with a new seal.
-
Note that there are sleeves only on the outer stud screws, then tighten to: 25 Nm (18.5 ft. lbs.).
2. Install the steering servo pump's console with pump and install the belt.
3. Release the tension on the belt tensioner with an extension to a ratchet, then remove the drill.
4. Install the turbocharger, refer to Powertrain Management.