900 SE Sedan L4-1985cc 2.0L DOHC Turbo EFI (1996)
Fuel Pressure Regulator: Service and Repair
Pressure Regulator V6 Engine
PRESSURE REGULATOR, V6 ENGINE
To Remove:
1. Disconnect the vacuum hose.
2. Slacken the screw and lower the clip.
3. Withdraw the pressure regulator.
To Fit:
Fit in reverse order.
Important Lubricate the 0-ring before fitting it in place. Check that the pressure regulator vacuum hose is connected to the front nipple on the throttle
body (in front of the butterfly).