900 SE Sedan L4-1985cc 2.0L DOHC Turbo EFI (1996)
Intermittent wiper operation
1
Check the switch and position J for intermittent wiper operation by selecting "READ SWITCHES" from the ISAT scan tool menu and then
"INTERM. WINDSC. WIPR".
Read the ISAT scan tool display when the switch is moved to the intermittent operation position.
Switch in position J --> "ON"
Switch in position 0 --> "OFF"
2
If this is not the case, check that a 12 V power supply is present on pin 10 of the switch when in position J.
3
If no power supply is present, change the switch.
If a power supply is present, check the wiring between pin 39 of the ICE module connector and pin 10 of the switch connector.
