900 SE Sedan L4-1985cc 2.0L DOHC Turbo EFI (1996)
Rear wiper, intermittent operation
1
Check the switch and the ON position for intermittent operation of the rear window wiper by selecting "READ SWITCHES" from the ISAT scan
tool menu and then "INTERM. REARW. WIPER".
Read the ISAT scan tool display when the switch is moved to the intermittent operation position.
Switch in ON position -->"ON"
Switch in OFF position -->"OFF"
If this is not the case, check that a 12 V power supply is present on pin 2 of the switch when in the ON position. If no power supply is present,
change the windshield wiper switch.
It a power supply is present, check the wiring between pin 15 of the ICE module connector and pin 2 of the switch connector.
