900 SE Sedan V6-2498cc 2.5L DOHC (1995)
To ensure proper connection of mobile telephones in Saabs, the Factory has provided connectors located behind the center dash panel for easy
installation. See Figure 1 for 900 information. The connector in 9000 models is similarly located. See Figure 5 for 9000 information.
We are including a wiring diagram in this bulletin, showing correct wiring for this accessory on a 1994- 900 model to ensure that the item functions
properly and does not cause any interference with the vehicle's electrical system. See Figure 4 for 9000 wiring diagram.
Since 1990, 9000 models have come with a 4-pole connector located behind the center dash panel to the right. See ** Figure 5 for more information
regarding this connector. An additional wire may be added to M95-96 models to include the audio system mute function. Use a length of 16 gauge wire
and two terminals, P/N 91 20 957. See Figure 4 for proper connections.**
Saab recommends when installing mobile telephones and/or communications radios that an external antenna be used to eliminate the generation of
electromagnetic fields within the vehicle and to increase the range of the component.
For 900's, the special 6-pole connector provides.
^
+30 supply from fuse 23 (pin 1)
^
+15 supply from fuse 17 (pin 2)
^
adjustment of the light from rheostat 16 (pin 3)
^
reduction of radio volume in the case of incoming/outgoing calls (pin 5)