900 SE Sedan V6-2498cc 2.5L DOHC (1995)
Clutch Cable: Service and Repair
Dismantling
1
Disconnect the battery cables and lift out the battery.
2
Disconnect the clutch wire from the gearbox clutch lever by pulling the wire and unhooking it from the wire stop.
3
Disconnect the wire's rubber dampener from the fastener on the gearbox.
4
Remove the cover from the distribution box and remove any hood contact for an alarm.
5
Remove the nut, disconnect and turn aside the distribution box.
6
Disconnect the wire's cover from the fastener on the wheel house (left-hand drive cars) or the fastener on the gearbox and the strut of the engine
compartment respectively (right-hand drive cars).