900 Turbo Convertible L4-1985cc 2.0L DOHC Turbo EFI (1994)
To ensure proper connection of mobile telephones in Saabs, the Factory has provided connectors located behind the center dash panel for easy
installation. See Figure 1 for 900 information. The connector in 9000 models is similarly located. See Figure 5 for 9000 information.
We are including a wiring diagram in this bulletin, showing correct wiring for this accessory on a 1994- 900 model to ensure that the item functions
properly and does not cause any interference with the vehicle's electrical system. See Figure 4 for 9000 wiring diagram.
Since 1990, 9000 models have come with a 4-pole connector located behind the center dash panel to the right. See ** Figure 5 for more information
regarding this connector. An additional wire may be added to M95-96 models to include the audio system mute function. Use a length of 16 gauge wire
and two terminals, P/N 91 20 957. See Figure 4 for proper connections.**
Saab recommends when installing mobile telephones and/or communications radios that an external antenna be used to eliminate the generation of
electromagnetic fields within the vehicle and to increase the range of the component.
For 900's, the special 6-pole connector provides.
^
+30 supply from fuse 23 (pin 1)
^
+15 supply from fuse 17 (pin 2)
^
adjustment of the light from rheostat 16 (pin 3)
^
reduction of radio volume in the case of incoming/outgoing calls (pin 5)