900 Turbo Convertible L4-1985cc 2.0L DOHC Turbo EFI (1994)
Tightening torque 4 Nm (3 lbf ft).
6.
Fasten the wiring harness to the coolant hose between the engine and the radiator.
7.
Raise the car and tighten the radiator drain plug.
Tightening torque 4 Nm (3 lbf ft).
8.
Fit the hose clamps on the hoses between the engine and the heat exchanger.
Tightening torque 4 Nm (3 lbf ft).
9.
Lower the car, refill with the specified amount of coolant and check the tightness of the system.
10.
Replace the expansion tank lid, start the engine and let it run until warm, preferably at varying rpm, until the thermostat opens. Turn off the engine
and refill if necessary.
Warranty/Time Information
Normal warranty rules apply.