saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 772 > < Diagram Information and Instructions|Page 770
Page 10
background image

H33-3

Blue connector on the bracket below the left-hand A pillar.

H33-4

On the bulkhead partition behind the glove box.

Grounding Points

G14

Grounding point, left-hand front seat member, under the seat.

G24

Grounding point, right-hand front seat member, under the seat.

G33S

Grounding point, connector bracket (Signal) below the left-hand A pillar

G33P

Grounding point, connector bracket (Power) below the left-hand A pillar.

DESCRIPTION OF OPERATION

Because the Integrated Central Electronics (ICE) system is so extensive, only information of a more general nature can be given in this system.

The ICE (Integrated Central Electronics) is a programmable electronic unit which controls a number of relays as well as sending and receiving
information to and from different components.

The ICE Unit Controls The Following Functions:
^

Main and dipped beams

^

Follow-me-home function

^

Direction indicators, hazard flashers

^

Extra fog lights

^

A/C compressor turn-off

^

Radiator fan (high and low speed)

^

Intermittent wash/wipe, windshield and rear window

^

Electrical heating of rear window and door mirrors

^

Interior lighting and reading lights

^

Seat-belt and ignition-key warning

^

Monitoring of rear parking lights and brake lights

^

Electrically adjustable front seats

^

Monitoring of battery voltage

The Following Components Send Information To The ICE:
^

Lights switch

^

Dipswitch

^

Direction indicator stalk switch and hazard flashers switch

^

Switch for extra fog lights

^

Brake light switch

^

Coolant temperature sensor

^

A/C system pressure switches

^

Windshield and rear window wiper stalk switch

^

ACC control panel with information for electrically heated rear window and A/C compressor

^

Door switches

^

Driver's seat-belt switch

^

Ignition switch

The ICE Sends The Following Information:
^

Door open (to main instrument display panel and anti-theft alarm)

^

Different types of sound, such as for seat-belt and ignition key reminder (to the SID unit)

^

Defective rear light or brake light (to SID unit)

^

Coolant temperature (to main instrument display panel)

^

Prior notice of radiator fan turn-on/turn-off (to M2.10.2 engine management system)

1. Lighting Front And Rear

In regard to the lighting systems, the ICE controls the relays for the lights, main and dipped beam, and extra fog lights.

Main and dipped beam are monitored by means of a filament monitor located together with the lighting relays in the main fuse box in the
engine bay.

The ICE monitors the rear parking lights, brake lights and high-level brake light.

Should a rear bulb fail, the ICE informs the SID unit which grounds the "Defective lamp" warning lamp in main instrument display panel 1 or
displays a message and lights up the INFO DISPL lamp in main instrument display panel 2.

The ICE also controls a "Follow-me-home" function,i.e. if the dipswitch is actuated after the door is opened, dipped beams will continue to
shine for about 30 seconds after the door is closed.

Diagram Information and Instructions|Page 772 > < Diagram Information and Instructions|Page 770