900 Turbo Convertible L4-1985cc 2.0L DOHC Turbo EFI (1994)
2. Unplug the pressure switch connector.
3. Connect the adapter wiring harness between the pressure switch connector and the regular wiring harness connector. Run the adapter wiring harness
behind the receiver. See Figure 6.
4. Fix the adapter wiring harness to the receiver in such a way that it cannot move and make a noise. Also make sure that connectors and leads do not
come into contact with the condenser.
5. Fit the front grille onto the two locating pins which secure it at the bottom and press it down onto the two clips which secure it at the top.
6. Close the hood.
Warranty Information:
Based on a customer complaint, a warranty claim may be submitted using the following information:
Failure code: 10817-47-0-01-05.
Labor operation: 10817 for 5.0 hr.
NOTE:
Please add $10.00 to sublet for incidental supplies.
Please update your DCS Tables using the following information:
Failed part code: 10817
Description: Corr. complaint of idle vib.
Operation number Table: 10817
Description: Corr. complaint. of idle vib.
Transmission type: A
Engine type: 9
M 94- 900 only
5.0 hrs.
Begin year 94
End year 95
