900 Turbo Convertible L4-1985cc 2.0L DOHC Turbo EFI (1994)
Shift Fork: Service and Repair
Removal of Selector Lever
NOTE: Component identifier numbers used in the following illustrations relate to specific steps in the procedures below.
Disassembly
NOTE: When dismantling the gear change mechanism the gear change shafts must be in neutral position.
1. Place the gear change mechanism in a screw vice with protective jaw faces.
2. Tap out the clamping pin for the gear change lever's shaft
3. Tap out the shaft and remove the selector lever.
NOTE: The catch balls fall out of the selector lever during dismantling.