900 Turbo Convertible L4-1985cc 2.0L DOHC Turbo EFI (1994)
16.
Measure and mark the point on the rear bumper sill where the two holes for the switch are to be drilled (see template).
IMPORTANT:
Remove all drilling shavings from the trunk.
17.
Attach clip P/N 79 68 001 on the switch. Mount the switch using screws P/N 85 77 793. Hold the switch from underneath so that it does not turn
and trap the push rod in the hole.
Connect the interior lighting lead.
Check the operation of the switch.