saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Rear Bumper Fascia Replacement|Page 11094 > < Rear Bumper Fascia Replacement
Page 2
background image

Note:  Danger of damage. Carefully disengage rear fascia from the outer supports. Push side of rear fascia upwards in the outer support area and at
the same time pull outwards in direction of arrow. 

4. With the aid of an assistant, remove the rear fascia (1). 

*

Release the rear fascia from the left and right outer supports.

*

Release the rear fascia from the rear center support. 

*

Disconnect the main wiring harness plug (2). 

5. When replacing the rear fascia, transfer the attaching parts.

Installation Procedure

1. With the aid of an assistant position rear fascia. 

*

Connect the main wiring harness plug. 

*

Install the rear fascia into the left and right outer supports. 

Rear Bumper Fascia Replacement|Page 11094 > < Rear Bumper Fascia Replacement