Astra L4-1.8L (2009)
*
Install the rear fascia into the rear center support.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the rear fascia.
*
Tighten the 4 outside right and left fascia bolts to 2.5 Nm (22 lb in).
*
Tighten the 2 center fascia bolts to 2.5 Nm (22 lb in).
3. Install the license plate.
4. Install the tail lamps. Refer to Tail Lamp Replacement (See: Lighting and Horns/Tail Lamp/Service and Repair/Tail Lamp Replacement) and Tail
Lamp Circuit Board Replacement (See: Lighting and Horns/Relays and Modules - Lighting and Horns/Tail Lamp Control Module/Service and
Repair).