Astra L4-1.8L (2009)
9. Carefully grind the weld (1) from around the body side door hinge.
10. Remove the hinge and grind any remaining weld from the pillar surface in order to ensure a flush fit of the service hinge.
Installation Procedure
1. Prepare all mating surfaces.
2. Apply GM approved Weld-Thru coating or equivalent to all mating surfaces. Refer to Anti-Corrosion Treatment and Repair ().
3. Position the hinge with prior markings and secure with a suitable tool.
4. MIG tack weld the hinge in the areas noted (1).
5. With the aid of an assistant, position the door assembly to the door opening.
