Astra L4-1.8L (2009)
Note: The gap specifications refer to unpainted doors before completion with lock and striker installed but without door seals
7. Align door with the following gap specifications.
1. Position: I
Dimensions in mm: 3.9
Tolerance in mm: +/- 1.0
2. Position: II
Dimensions in mm: 4.5
Tolerance in mm: +/- 1.0
3. Position: III
Dimensions in mm: 4.5
Tolerance in mm: +/- 1.0
4. Position: IV
Dimensions in mm: 4.0
Tolerance in mm: +/- 1.0
5. Position: V
Dimensions in mm: 3.8
Tolerance in mm: +/- 0.8
6. Position: VI
Dimensions in mm: 3.8
Tolerance in mm: +/- 0.8
7. Position: VII
