Astra L4-1.8L (2009)
4. Remove the front side door trim panel.
Remove the 8 screws (arrows).
Note: Use a plastic wedge to remove the inner paneling (1).
5. Remove the front door trim panel.
*
Release the 5 clips.
*
Disconnect the window actuation wiring harness plug switch.
*
Disconnect the inside door actuator cable.
*
Remove the door trim panel with the inner window channel strip.
6. Remove the power window switch.
Installation Procedure
1. Install the power window switch.
2. Install the front door inner paneling.
*
Install the cable, door actuation from inside.
*
Connect the power window actuation wiring harness plug switch.
*
Install the 5 clips.
