Astra L4-1.8L (2009)
3. Remove the actuator switch from the liftgate panel.
*
Remove the 2 bolts from the guide (arrow).
*
Disconnect the wiring harness plug (2).
*
Disconnect the wiring harness.
*
Remove the 2 retaining lugs (1).
*
Remove the switch.
Installation Procedure
1. Install the switch in the liftgate panel.
*
Install in the switch.
*
Connect the wiring harness.
*
Connect the wiring harness plug.
*
Install the 2 bolts into the guide.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the liftgate applique panel.
Connect the wiring harness plug.