Astra L4-1.8L (2009)
22. Remove the carpet.
1. Open the quick release fastener (1).
2. Disconnect the wiring harness clip (2).
23. Remove the carpet beginning from the rear.
Installation Procedure
1. Install the carpet beginning at the front.
2. Insert the carpet.
1. Close the quick release fastener.
2. Connect the wiring harness clip.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the I/P padding bracket, both sides, and tighten the 6 bolts to 13 Nm (113 lb in).
4. Install the heating duct.
5. Fasten the cable duct.
1. Connect the 2 wiring harness plugs.
2. Install the ground strap and tighten the nut to 5 Nm (44 lb in).
