Astra L4-1.8L (2009)
10. Remove the cushion cover.
1. Remove the 11 clamps.
2. Remove the cushion cover.
Installation Procedure
1. Install the cushion cover.
1. Position the cushion cover.
2. Install the 11 clamps.
2. Install the belt panel.
3. Install the head restraint guide sleeve.
Engage the 4 head restraint guide sleeves (audible click).
4. Insert the surrounding cushion cover.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
5. Install the left and right brackets.
Tighten the 3 bolts to 25 Nm (18 lb ft).
6. Install the rear seat backrest cover.
Install the 11 clips.
7. Install the head restraints.
8. Insert the rear seat backrest.
9. Install the rear seat backrest.
Tighten the 2 screws at the back to 20 Nm (15 lb ft).
Note: Use screw locking compound.
10. Fold down the rear seat backrest.
Insert the 2 seat belt buckles.
*
Tighten the 2 bolts, side to 20 Nm (15 lb ft).
*
Tighten the 2 front bolts to 20 Nm (15 lb ft).
11. Insert the rear seat cushions and lock.
