Astra L4-1.8L (2009)
1. Install the heater hoses to the heater core.
*
Slide the 2 locks on the quick-release fittings in the arrow direction up to the stop.
*
Plastic rings (green) are covered.
*
Install the 2 quick-release fittings on the heater core (1) connections up to the stop.
*
Note the markings applied. Slide the 2 locks (3) on the quick-release fittings in the arrow direction up to the stop.
*
Plastic rings (green) must be visible.
*
Inspect the correct seat of quick-release fittings and visibility of the plastic rings, arrows.