saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Valve Spring|Service and Repair|Page 2173 > < Valve Cover|Service and Repair|Page 2169
Page 1
background image

Valve Spring: Service and Repair

Valve Stem Oil Seal and Valve Spring Replacement

Special Tools

*

KM-958  Valve Stem Seal Installer

*

KM-6625  Flywheel Locking Device

*

MKM-6086  Automatic Valve Spring Lever

*

SA9102E-A  /KM-840 Valve Seal Remover/Replacer 

Removal Procedure

1. Remove all cup tappets. Refer to Valve Lifter Replacement   (See: Camshaft, Lifters and Push Rods/Lifter / Lash Adjuster/Service and Repair).
2. Remove the spark plugs. Refer to Spark Plug Replacement   (See: Tune-up and Engine Performance Checks/Spark Plug/Service and Repair).

Note:  180 degrees offset to marking ignition TDC cylinder number 1.

Valve Spring|Service and Repair|Page 2173 > < Valve Cover|Service and Repair|Page 2169