Astra L4-1.8L (2009)
Note: Threading the drive belt through the engine mount support is only permissible in conjunction with the assembly tool supplied with new
toothed belts as otherwise it is possible to damage the toothed belt at this stage by kinking it.
5. Insert the drive belt.
*
Insert the drive belt (1) in the enclosed assembly tool (2)
If the drive belt has been used, observe direction of rotation.
*
Guide the drive belt through the engine mount support with the assembly tool.
*
Remove the assembly tool.
Note: Observe direction of rotation.
6. Position the drive belt.
*
Position the drive belt on the intake camshaft adjuster.
*
Position the drive belt on the exhaust camshaft adjuster.