saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Camshaft Position Intake Actuator Replacement|Page 2814 > < Camshaft Position Intake Actuator Replacement|Page 2812
Page 2
background image

6. Set the engine to 60 degrees (measurement l) before TDC.

Set the crankshaft in the direction of engine rotation to 60 degrees (measurement l) before TDC.

7. Lower the vehicle by its full height.

8. Remove the toothed belt tensioner (1).

Remove the bolt (2).

9. Place a drip pan underneath.

10. Remove MK-6340  .

Camshaft Position Intake Actuator Replacement|Page 2814 > < Camshaft Position Intake Actuator Replacement|Page 2812