Astra L4-1.8L (2009)
Headlamp Control Module: Service and Repair
Headlamp Control Module Replacement
Removal Procedure
Warning: High voltage-Do not touch components in the xenon dipped beam when the dipped beam is switched on. Ignition and light switch
OFF.
Note: When replacing the control unit, before removing the control unit, carry out a "Reset" using TECH 2. For reprogramming procedures, refer to
Control Module References (See: Testing and Inspection/Programming and Relearning).
Warning: Refer to Battery Disconnect Warning (See: Starting and Charging/Battery/Service Precautions).
1. Disconnect the battery.
2. Remove the headlamp control module.
