saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Brake Light Switch > < Backup Lamp Switch|Diagrams|Page 12875
Page 2
background image

1. Install the backup lamp switch.

*

Tighten the backup lamp switch (1). 

Tighten to 20 Nm (15 lb ft).

*

Connect the wiring harness plug to the backup lamp switch.

2. Inspect the transmission fluid level. Refer to Transmission Fluid Check   (See: Transmission and Drivetrain/Manual

Transmission/Transaxle/Service and Repair/Removal and Replacement/Transmission Fluid Check).

Brake Light Switch > < Backup Lamp Switch|Diagrams|Page 12875