Astra L4-1.8L (2009)
Note:
*
Before installing the tail lamp, ensure that the tail lamp gasket is seated correctly.
*
The gasket (1) with the flat side must not be confused with the gasket (3).
2. Install the gasket (2).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the tail lamp circuit board.
*
Connect wiring harness plug.
*
Insert tail lamp circuit board.
*
Close the access panel.
Tighten the 2 screws to 5 Nm (44 lb in).