saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Wheels and Tires > < Malfunction Indicator Lamp|Testing and Inspection|Page 1716
Page 1
background image

Oil Change Reminder Lamp: Service and Repair

ENGINE OIL LIFE SYSTEM

When to Change Engine Oil

This vehicle has a computer system that indicates when to change the engine oil and filter. This is based on engine revolutions and engine temperature,
and not on mileage. Based on driving conditions, the mileage at which an oil change is indicated can vary considerably. For the oil life system to work
properly, the system must be reset every time the oil is changed. Refer to Service Reminder Indicators.

When the system has calculated that oil life has been diminished, it indicates that an oil change is necessary. The letters "InSP" will appear in the
odometer display. Change the oil as soon as possible within the mileage indicated on the display. If driving under the best conditions, the oil life
system might indicate that an oil change is necessary once a year. The engine oil and filter must be changed at least once a year and at this time the
system must be reset. It is also important to check the oil regularly and keep it at the proper level.

If the system is ever reset accidentally, the oil must be changed at 3,000 miles (5 000 km) since the last oil change. Remember to reset the oil life
system whenever the oil is changed.

How to Reset the Engine Oil Life System

The Engine Oil Life System calculates when to change the engine oil and filter based on vehicle use. Whenever the oil is changed, reset the system so
it can calculate when the next oil change is required. If a situation occurs where the oil is changed prior to the letters InSP appearing in the odometer
display, reset the system.

After changing the engine oil, reset the system:

1. Turn the ignition key to "LOCK/OFF".
2. Press the instrument panel cluster stem until the odometer is displayed, then release the stem.
3. Re-press and hold the cluster stem until the letters "InSP" are displayed.
4. Press and hold the brake pedal down, hold the cluster stem down, and turn the ignition key to "ON/RUN".
5. The letters "InSP" in the instrument panel cluster display will flash.
6. Keep the cluster stem down for at least 10 seconds and release the stem and the brake pedal when the message "new remaining milage" is

displayed.

What to Do with Used Oil

Used engine oil contains certain elements that can be unhealthy for your skin and could even cause cancer. Do not let used oil stay on your skin for
very long. Clean your skin and nails with soap and water, or a good hand cleaner. Wash or properly dispose of clothing or rags containing used engine
oil. See the manufacturer's warnings about the use and disposal of oil products.

Used oil can be a threat to the environment. If you change your own oil, be sure to drain all the oil from the filter before disposal. Never dispose of oil
by putting it in the trash, pouring it on the ground, into sewers, or into streams or bodies of water. Recycle it by taking it to a place that collects used
oil.

Wheels and Tires > < Malfunction Indicator Lamp|Testing and Inspection|Page 1716