Astra L4-1.8L (2009)
Note: To prevent damage to tire pressure sensor, the tire should be fitted to the rim starting approximately 170 degrees in the fitting direction
before the valve when fitting starts (2).
2. Install the tire onto the rim and balance it. Refer to Tire and Wheel Assembly Balancing - Off Vehicle (See: Testing and Inspection/Symptom
Related Diagnostic Procedures/Vibration Diagnosis and Correction/Repair Instructions/Tire and Wheel Assembly Balancing - Off Vehicle) and
Tire and Wheel Assembly Balancing - On-Vehicle (See: Testing and Inspection/Symptom Related Diagnostic Procedures/Vibration Diagnosis
and Correction/Repair Instructions/Tire and Wheel Assembly Balancing - On-Vehicle).
3. Install the wheel.
Tighten the 5 bolts to 110 Nm (81 lb ft).
