Astra L4-1.8L (2009)
2. Connect the wheel sensor wiring harness (1).
3. Install brake disc of rear wheel brake. Refer to Rear Brake Rotor Replacement (See: Brakes and Traction Control/Disc Brake System/Brake
Rotor/Disc/Service and Repair/Removal and Replacement/Rear Brake Rotor Replacement).
Note: Clean the thread and insert bolt with locking compound.
4. Attach the brake caliper with brake carrier to the brake anchor plate.
Tighten to 100 Nm (74 lb ft).
*
Slide the brake caliper onto the brake disc.
*
Install the 2 bolts.
5. If removed, install brake pads of the rear wheel brake. Refer to Rear Disc Brake Pads Replacement (See: Brakes and Traction Control/Disc
Brake System/Brake Pad/Service and Repair/Rear Disc Brake Pads Replacement).
6. Attach the handbrake cable to the brake caliper.
*
Insert the handbrake cable into the bracket on the brake caliper.
*
Attach the retaining clip to the handbrake cable.
*
Push down the operating lever at the brake caliper using a screwdriver.
*
Install the handbrake cable.
7. Install the rear wheel.
Tighten to 110 Nm (81 lb ft).
8. Adjust the handbrake. Refer to Parking Brake Adjustment (See: Brakes and Traction Control/Parking Brake System/Adjustments).