saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Fuel Level Sensor|Service and Repair|Page 3687 > < Engine/Transmission - Aftermarket Calibrations|Page 3683
Page 1
background image

Fuel Level Sensor: Service and Repair

Fuel Level Sensor Replacement

Removal Procedure

Important:  
*

The fuel tank must be drained with a suitable, commercially-available fuel removal unit and suction hose - follow safety regulations
and national legislation. The fuel tank is fitted with a refill limit float valve. This is located on the filler neck in the fuel tank. To
prevent damaging the refill limit float valve, a suitable suction hose must be used. 

*

In the presence of fuel vapors or escaping fuel - observe safety regulations and national legislation. Store drained fuel in a suitable,
sealable container. 

1. Remove the fuel tank. Refer to Fuel Tank Replacement   (See: Fuel Delivery and Air Induction/Fuel Tank/Service and Repair). 

Fuel Level Sensor|Service and Repair|Page 3687 > < Engine/Transmission - Aftermarket Calibrations|Page 3683